800-352-6631 8AM - 5PM CST / Monday - Friday

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Type 4X Polyester Junction Box w/ Window by Hammond Manufacturing at Rackmount Solutions

Explore More IT Solutions

Type 4X Polyester Junction Box w/ Window

|

SKU# PJ1084HW - Hammond Manufacturing

$200.88

Shipping calculated at checkout.

Product variants

Quantity

Need it fast? Stock can vary, so reach out to us first for up-to-date availability and lead times on time-sensitive orders.

Shipping Method: Small Package (UPS)

Estimated Ship Date: Tue Sep 1 - Thu Sep 3

Overview

IT Pros Also Viewed

Knockdown Server Rack Cabinet by Hammond Manufacturing at Rackmount Solutions

Knockdown Server Rack Cabinet by Hammond Manufacturing at Rackmount Solutions

Hammond Manufacturing

Knockdown Server Rack Cabinet From $1,078.86

Choose Options

H1 Data Center Server Cabinet - White by Hammond Manufacturing at Rackmount Solutions

H1 Data Center Server Cabinet - Black by Hammond Manufacturing at Rackmount Solutions

Hammond Manufacturing

H1 Data Center Server Cabinet - Black From $3,894.00

Choose Options

Rack Basics RB-SW Swing-Out Wall Mount Rack Cabinet by Hammond Manufacturing at Rackmount Solutions

Rack Basics RB-SW Swing-Out Wall Mount Rack Cabinet by Hammond Manufacturing at Rackmount Solutions

Hammond Manufacturing

Rack Basics RB-SW Swing-Out Wall Mount Rack Cabinet From $354.00

Choose Options

Rack Basics RB-DC Server Rack Cabinet

Black server cabinet on a white background

Hammond Manufacturing

Rack Basics RB-DC Server Rack Cabinet From $1,711.00

Choose Options

1U Adjustable Depth Vented Server Rack Shelf

1U Adjustable Depth Vented Server Rack Shelf

Hammond Manufacturing

1U Adjustable Depth Vented Server Rack Shelf From $178.69

5.0

Choose Options

Product Information

Type 4X Polyester Junction Box w/ Window

Product Description

N4X Wallmount Encl - 10.14 x 8.26 x 4.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 10.14 x 8.26 x 4.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 10.14 x 8.26 x 4.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 10.14 x 8.26 x 4.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 10.13 x 8.26 x 6.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 10.13 x 8.26 x 6.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 10.13 x 8.26 x 6.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 10.13 x 8.26 x 6.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 12.13 x 10.26 x 6.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 12.13 x 10.26 x 6.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 12.13 x 10.26 x 6.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 12.13 x 10.26 x 6.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

NON MET HNG SCREW CVR/WINDOW

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

NON MET SCREW COV/WINDOW

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

NON MET HNG SNAP LAT CH/WINDW

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

NON MET WINDOW COVER HINGE TWI

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

NON MET SCREW COV/WINDOW

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 14.13 x x12.26 x 6.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 14.13 x x12.26 x 6.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 14.13 x x12.26 x 6.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 14.13 x x12.26 x 6.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 16.27 x 14.40 x 8.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 16.27 x 14.40 x 8.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 16.27 x 14.40 x 8.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 16.27 x 14.40 x 8.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 18.40 x 16.40 x 8.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 18.40 x 16.40 x 8.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 18.40 x 16.40 x 8.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 18.40 x 16.40 x 8.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 20.00 x 16.00 x 8.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 20.00 x 16.00 x 8.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 20.00 x 16.00 x 8.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 20.00 x 16.00 x 8.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 6.10 x 6.10 x 4.18 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 6.10 x 6.10 x 4.18 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 6.10 x 6.10 x 4.18 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 6.10 x 6.10 x 4.18 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 8.00 x 6.12 x 4.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

N4X Wallmount Encl - 8.00 x 6.12 x 4.13 - Fiberglass

Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
Standard JIC sizes under 18"x16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
Stainless steel draw type "snap latch" door fasteners.
Door fasteners include a provision for padlocking.
Enclosures are available with bonded polycarbonate viewing windows.
Door is supported with a continuous stainless steel hinge.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical Information section.

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive environments.

USMCA Compliant:

Yes

IP Rating:

IP66

REACH Compliant:

Yes

Panel:

Available (sold separately)

Type Rating:

type-3r, type-13, type-4x

Standards:

UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66

Product Specs

Downloads

Cart ⁰

Your cart is currently empty.